Creating a bootable Live DVD

Updated 13 November 2026

Calculate Linux

What the Live DVD is for

Calculate Linux is distributed as ISO images. To boot the computer from the disc, write the image file to a recordable DVD. The published images contain boot records for both BIOS and UEFI, so you do not need to configure the bootloader.

Checking the image before writing

Before writing, compare the downloaded image with the published checksum. The SHA256SUMS file with the checksums of all images is located in the same release directory on the mirror you downloaded the image from; the image itself is chosen on the Download page. Place the SHA256SUMS file in the same directory as the image and run the command in that directory:

sha256sum -c --ignore-missing SHA256SUMS
cld-20261106-x86_64.iso: OK

The --ignore-missing option checks only the files that are actually present in the directory - the lines for the remaining images in the file are skipped.

Any recordable DVD will do for writing: DVD-R or DVD+R. If the image does not fit on a single-layer disc, use a dual-layer DVD±R DL.

Burning from Calculate Linux

All desktop editions (CLD, CLDC, CLDL, CLDM, CLDX, CLDXS) already have the console burning programs installed: growisofs from the app-cdr/dvd+rw-tools package and cdrecord from the app-cdr/cdrtools package. In the CCM, CLS and CSS editions, growisofs is not included - install it:

emerge -a dvd+rw-tools

Insert a blank recordable disc and run the command from the directory with the image:

growisofs -dvd-compat -Z /dev/sr0=cld-20261106-x86_64.iso

where:

  • -dvd-compat writes the whole disc in one continuous session for maximum compatibility with DVD-ROM drives; afterwards, no data can be added to such a disc;
  • -Z writes the initial session, and in the form device=file - the prepared image;
  • /dev/sr0 - the drive device (the system adds the symlink /dev/cdrom for the first drive);
  • cld-20261106-x86_64.iso - the image file name; substitute your own.

Burning time depends on the drive speed and the image size.

Instead of growisofs, you can use the second built-in program - cdrecord. The -eject option ejects the disc after burning:

cdrecord -v dev=/dev/sr0 -eject cld-20261106-x86_64.iso

Graphical burning programs

By default, desktop editions have no graphical disc burning program. Install the program matching your environment - k3b for KDE, xfburn for Xfce, brasero for GNOME and MATE:

emerge -a k3b

In Calculate, any of these programs is automatically associated with ISO image files after installation: double-clicking an image launches that program.

Burning from other Linux distributions

The commands above work in any Linux distribution that has the same tools installed: growisofs and cdrecord. The dvd+rw-tools and cdrtools packages are available in the repositories of popular distributions; check whether the packages are available in yours.

Burning in Windows

In Windows 7 and later, disc image burning is built into the system. Right-click the image file and select "Burn disc image" - the Windows disc image burning program opens. In the window that opens, specify the burning device and click "Burn".

Burning in macOS

In macOS, the image is burned with the built-in tool: right-click the image file and select "Burn disc image…". In Terminal, you can get the same result with the command:

hdiutil burn cld-20261106-x86_64.iso

Booting from the finished disc

Insert the disc into the drive and select it in the list of boot devices when you power on the computer. The key to open the boot menu is specified in the computer's manual. The disc boots in Live mode: the system runs from the optical media without being installed on the hard drive, and you can launch the installer from the desktop. The next steps are described in Installing on a hard drive and Installing in console mode; writing the image to a flash drive is described in Creating a bootable USB flash drive.